Two charges, not one
Empower, a Dubai district cooling provider, bills residents in two parts. The capacity charge is AED 750 per refrigeration ton (RT) per year, based on the cooling capacity contracted for your home and billed monthly. A 6 RT flat pays AED 4,500 a year in capacity charges whether the fan coils run or not. On top comes a consumption charge for the cooling you actually use, metered in RT-hours, plus meter fees and 5% VAT.
What a thermostat changes
A fan coil thermostat opens the chilled water valve and runs the fan when the room is warmer than its set point. Less runtime means fewer RT-hours on the meter, so the consumption charge falls. The capacity charge does not move, because it depends on your contract, not your use.
A Wi-Fi thermostat helps in three practical ways:
- Schedules, so empty rooms stop cooling during work hours
- Remote off, for the room someone left running
- A higher set point when you’re out. DEWA advises 24 °C or higher and says each degree up can save up to 5% of cooling energy
Before you swap a thermostat
The fan coil and thermostat usually belong to the building, and the landlord is normally responsible for servicing them. Get written approval from the landlord or building management. If the tower’s building management system controls fan coils over Modbus, a Wi-Fi thermostat would cut that link, so the right swap may be a Modbus model or none.
Tariffs differ between providers and buildings, so check your own bill for the rates that apply.