Why a normal smart thermostat won’t fit
Fan coil thermostats switch mains voltage: the fan speeds and the chilled water valve run at 230 V. Nest, ecobee and other wall thermostats made for central systems run on 24 V, and Google warns that connecting line voltage damages a Nest. A fan coil needs a line-voltage fan coil thermostat.
What we match before quoting
- 2-pipe or 4-pipe. A 2-pipe unit has one valve. A 4-pipe unit has separate chilled and hot water valves, so the thermostat needs two valve outputs
- Valve type. On/off motorised valves, or 0–10 V modulating valves that need a modulating output
- Fan. Most units have a 3-speed fan. EC fans take a 0–10 V signal instead
- Building system. If the tower’s BMS controls your fan coils over Modbus, a Wi-Fi thermostat would cut it off. Then we fit a Modbus model or nothing
District cooling bills
Empower bills Dubai homes a fixed capacity charge per refrigeration ton each year and a consumption charge for what you use. A smarter thermostat that switches off empty rooms lowers the consumption part only. The capacity charge stays the same. More on that in fan coil thermostats and district cooling bills.
Permission first
The fan coil and its thermostat usually belong to the building, and the landlord is normally responsible for servicing them. We ask for written approval from the landlord or building management before we touch the wiring, and we keep the old thermostat so it can go back at the end of a lease.